Project
Quantity
Item #
Model Specified:
CSI Section 11400
Roll-In Double Depth Refrigerators and
Freezer Models/Self-Contained
Two & Three Section Roll-In Models - 64" Deep
2-Section Refrigerator Model
3-Section Refrigerator Model
2-Section Freezer Model
3-Section Freezer Model
RRI264LUT-FHS
RRI364LUT-FHS
RIF264LUT-FHS
RIF364LUT-FHS
R
SERIES
Stainless Exterior
& Interior
INTELA-TRAUL®
Equipped!
The R-Series "L-Height" Roll-In Double Depth Refrigerator and Freezer
lines are designed to offer storage capacity and easy access for 66"
high racks. They are supplied standard with all the Traulsen top of the
line features, such as balanced refrigeration systems, next generation
INTELA-TRAUL® controls and stainless steel exteriors.Additionally, they
offer the widest range of optional accessories, and can be modified for
many applications, such as: correctional, export, etc. Racks are not
supplied by Traulsen.
Model RRI264LUT-FHS
Options & Accessories
Standard Product Features
•
•
•
Stainless Steel Finished Back With Rear Louvers
Re-Hinging Feature For Doors
•
•
•
Stainless Steel Exterior & Interior
INTELA-TRAUL® Microprocessor Control System
Balanced, Self-Contained Refrigeration System Using
R-134A or R-404A Refrigerant
Chrome Plated Shelf Package For Roll-In Model (includes
three shelves per section)
•
•
Additional Chrome Plated Shelves For Above
Stainless Steel Shelf Package For Roll-In Model (includes
three shelves per section)
Additional Stainless Steel Shelves For Above
Locking Hasps (padlocks supplied by others)
Kool Klad Exterior Laminate Decor
Floor Mounted Electric Condensate Evaporator (for use with
freezer models only)
Clear Glass Doors (refrigerator models only)
Fluorescent Lights (refrigerator models only)
Prison/Correctional Facilities Options
•
•
•
•
•
Full Length Stainless Steel Doors With Locks
Self-Closing Doors With Stay Open Feature At 120 Degrees
Guaranteed For Life Cam-Lift Hinges
Guaranteed For Life Horizontal Work Flow Door Handle
Standard Door Hinging: 232L = Left/Right,
332L = Left/Right/Right (other hingings available)
Automatically Activated Incandescent Lights
Stainless Steel Breaker Caps
Accommodates Roll-In Racks Up To 66" High (provided by
others)
Automatic Non-Electric Condensate Evaporator (refrigerator
models only)
Magnetic Snap-In Door Gaskets
Stainless Steel Door Liner
Stainless Steel Interior Rack Guides
Stainless Steel Threshold Ramps
Controllable Anti-Condensate Door Perimeter Heaters
Thermostatic Expansion Valve Metering Device
Stainless Steel One-Piece Louver Assembly
One Year Parts And Labor Warranty
Two Year Control Warranty (parts and labor)
Five Year Compressor Warranty
•
•
•
•
•
•
•
•
•
•
•
•
•
Remote Applications (see spec sheet 12-2 for more details)
Two Year Service/Labor Warranty Available
•
•
•
•
•
•
•
•
•
•
Approval: __________________________________
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
7-6
RIF264LUT Front View
RIF364LUT Front View
RIF264LUT Side View
RIF364LUT Side View
RIF264LUT Top View
RIF364LUT Top View
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
7-6
Project
Quantity
Item #
Model Specified:
CSI Section 11400
Specifications
Construction, Hardware and Insulation
Refrigeration System - Refrigerator Models
Cabinet exterior, including front, one piece sides, louver assembly and doors are
constructed of heavy gauge stainless steel. Cabinet interior and door liners are
constructed of stainless steel. Exterior cabinet top, back and bottom are constructed
A top mounted, self-contained, balanced refrigeration system using R-134a
refrigerant is conveniently located behind the one piece louver assembly. It features
a plenum effect blower coil, large, high humidity evaporator coil located outside the
food zone, and a top mounted non-electric condensate evaporator. Standard
operating temperature is 36 to 38°F.
of heavy gauge aluminized steel. The interior floor is constructed of stainless steel
3
and insulated with
provided.
⁄4" of resilient cork. A readily attachable stainless steel ramp is
Refrigeration System - Freezer Models
Doors are equipped with heavy-duty, extruded wiper gasket for sealing to bottom
ramp, removable plug cylinder locks and guaranteed for life cam-lift, gravity
action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges
include a switch to automatically activate the interior incandescent lighting.
Guaranteed for life, work flow door handle is mounted horizontally over recess in
door which limits protrusion from door face into aisleways.
A top mounted, self-contained, balanced refrigeration system using R-404A
refrigerant is conveniently located behind the one piece louver assembly. It features
a plenum effect blower coil, large, high humidity, interior mounted mullion coils, and
an automatic preset time activated electric defrost. A floor drain or optional electric
condensate evaporator is required for condensate removal. Standard operating
temperature is 0 to -5°F.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
Interior
Readily removable, interior-mounted, stainless steel guides for rack are provided for
protection. Maximum rack size with wheels inboard of frame is 27" wide by 29" deep
by 66" high. Racks supplied by others.
Cabinet and door contains high density, non-CFC, foamed in place polyurethane
insulation.
Warranties
Controller
Both a one year parts and labor warranty and a five year compressor warranty (self-
contained models only) are provided standard. An optional 2nd year extended parts
and labor warranty is also available. In addition the INTELA-TRAUL® control is
warranted by a two year parts and labor warranty.
The easy to use water resistant INTELA-TRAUL® microprocessor control system is
supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required for
network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, Defrost Lockout Feature (freezer models only)
and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabi-
net Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line
Sensor Failures, and Power Supply Interruption.
DIMENSIONAL DATA
Net capacity cu. ft.
Length - overall in.
Depth - overall in.
RRI264LUT
RRI364LUT
RIF264LUT
RIF364LUT
154.5 (4377 cu l) 239.0 (6771 cu l) 154.5 (4377 cu l) 239.0 (6771 cu l)
68 (172.7 cm)
679⁄16 (171.6 cm)
64 (162.6 cm)
951⁄4 (241.9 cm)
1001⁄2 (255.3 cm) 68 (172.7 cm)
679⁄16 (171.6 cm)
1001⁄2 (255.3 cm)
679⁄16 (171.6 cm)
64 (162.6 cm)
679⁄16 (171.6 cm)
Depth - over body in.
64 (162.6 cm)
951⁄4 (241.9 cm)
64 (162.6 cm)
951⁄4 (241.9 cm)
Depth - with door open
90 degrees in.
951⁄4 (241.9 cm)
Clear door width in.
Clear door height in.
Height - overall in.
Rack Capacity
271⁄16 (68.8 cm)
665⁄16 (168.4 cm)
831⁄4 (211.5 cm)
4
271⁄16 (68.8 cm)
663⁄8 (168.6 cm)
831⁄4 (211.5 cm)
6
271⁄16 (68.8 cm)
665⁄16 (168.4 cm)
831⁄4 (211.5 cm)
4
271⁄16 (68.8 cm)
663⁄8 (168.6 cm)
831⁄4 (211.5 cm)
6
Net Wt. lbs.
700 (318 kg)
980 (445 kg)
820 (372 kg)
1130 (513 kg)
ELECTRICAL DATA
Voltage
208-230/115/60/1 208-230/115/60/1 208-230/115/60/1 208-230/115/60/1
Feed wires with Ground
Full load amperes
Wattage1
4
4
4
4
17.0
2475
19.2
2795
22.0
3660
31.6
5258
REFRIGERATION DATA
Refrigerant
R-134a
R-134a
R-404A
R-404A
1
3
3
BTU/HR H.P.2
8400 (2 x
⁄
2
HP) 10240 (2 x
⁄
4
HP) 10440 (2 x 1 HP) 15160 (4 x
⁄
4
HP)
NOTES
NOTE: Figures in parentheses reflect metric equivalents.
1= Based on a 90 degree F ambient and 20 degree F evaporator for refrigerators and a 90 degree F
ambient and -10 degree F evaporator for freezers.
2= Wattage is determined by listed amps X listed volts X an average run time of 70% for refrigerators and
80% for freezers.
3= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other
information on remote models, please refer to spec sheet 12-2.
4= Shipped in two cartons for assembly at job site. For total shipping weight, double figure shown.
REQUIRED CLEARANCES
In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes. Therefore, the operating location must either have a minimum of 12”
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12” above is required in order to perform certain maintenance tasks.
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and
any additional warranties. For fast order entry: Fax 1 (800) 765-8728.
Continued product development may necessitate specification changes without notice.
Part No. TR35808 (revised 1/07)
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
7-6
|